home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Collection of Tools & Utilities
/
Collection of Tools and Utilities.iso
/
network
/
net_co41.zip
/
nc_help_.exe
/
PORT-BR.HPE
< prev
next >
Wrap
Text File
|
1993-09-23
|
1KB
|
28 lines
Help: Port and baudrate 17.03.93
Here you can configure the interface between the PC and
the Ethernet Box.
Choose the correct port (COM1:, COM2:, LPT1: or LPT2:)
and for a serial connection the correct baudrate (1200
to 38400 baud - the default baudrate is 9600 baud).
By ⌠<F8>⌡ or ⌠<Enter>⌡ you increases the baudrate, and by
⌠<F7>⌡ you lower it.
≤Connection to the Ethernet box:≥
If the program announces, that the Ethernet Box can not be
programmed correctly, it is to be examined first of all that the
connection between the box and your PC is correct. To test the
communication please use the terminal mode of Net-Control.
Check before the configured port and if necessary the
baudrate.
If you have connected the box serially Net-Control requires
only the signals: send, receive and ground (pins 2,3 and 7 of
the V24-interface). Pins 2 and 3 must be crossed.
For at parallel connection (LPT) you use a 25 pol. cable without
crosses.